PRECOR Resolute Series Lateral Raise
The design of the Resolute™ Strength Lateral Raise allows exercisers to easily adjust the seat height from a seated position to ensure shoulders are properly aligned with the pivot points. The upright, open design makes the Lateral Raise easy to enter and exit.
- Designed for proper biomechanics
- Fixed handles allow for proper positioning
- Roller pads for comfortable range of motion
| Manufacturers | Precor |
|---|
Weight Stack
Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
Upholstery
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Adjustable Seat
Yes, gas-assisted ratcheting seat adjustment
Adjustments
Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
Instructional Placard
Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
Bearings and Pivot Points
Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Water Bottle and Accessories Holder
The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
Pulleys and Cables
Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg).
Frame and Finish
The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat.
Bolt Down Capability Yes
General Features
Gas-assisted seat and inward-facing orientation helps user easily align shoulder joint to pivot. Padded arm pads and fixed handles allow for easy user positioning.
Equipment Specifications
Standard Shroud Color Black
Incremental Add-on Weight 5 lb (2.3 kg)
Weight Stack 160 lb / 73 kg
Workout Area (L x W) 53 L x 56 W inches / 134 L x 142 W cm
Standard Frame Colors Black Pearl; Gloss Metallic Silver
Stocked Upholstery Colors All Spice, Black, Grey
Additional Upholstery Options (Additional lead time applies)
American Beauty, Blue Jay, Burgundy, Deep Clay, Hunter Green, Navy, New Purple, Regal Blue, Slate
Length 54 inches / 137 cm
Width 49 inches / 125 cm
Height 58 inches / 148 cm
Equipment Weight 510 lb / 232 kg