Toggle Nav

Precor RBK 835 Recumbent Bike

$4,575.00
In stock
SKU
RBK835

The Precor RBK 835 recumbent bike features a step-through design to appeal to a wide range of exercisers of all ages. The simple seat adjustment allows the user to change the position of the seat with one hand, either on or off the bike. A ventilated air flex seat provides exceptional comfort.

More Information
Manufacturers Precor

Biomechanics
To achieve proper pedaling biomechanics, Precor designed the recumbent bike to maintain similar biomechanics as used on their upright bike. That means setting the angle of the seat rail with an offset from the crank to aide with efficient pedaling and reduced shear force on the knee. The seat rail angle is at 15 degrees with a slight offset from the crank axle. This places the knee directly over the ball of the foot (or pedal spindle) when the pedals are in the 2 and 8 o'clock position.


Accessories Holder(s): Yes

Transport Wheels: Integrated

Covers
Shrouds are attached with minimal hardware and can be removed without taking off the pedals or cranks.

Bearings
The bottom bracket assembly uses a hardened steel shaft with deep-groove sealed precision ball bearings designed for smooth operation and exceptional service life.

Pedals
For double the convenience, dual-sided pedals allow the rider to use the pedals with or without the integrated pedal strap. The extra wide pedal comfortably accommodates feet of all sizes, which allows proper pedaling form with the foot directly over the user's knee.

Resistance System

Minimum Watts 18 watts (level 1 at 20 RPM)
Maximum Watts 750 watts (level 25 at 150 RPM)
Resistance Levels 25
3-Piece Crank
3-piece crank tightens positively, reducing the need for periodic adjustments. The 170 mm crank arm accepts any standard road or mountain bike pedal.

Drive System
The two-stage drive system yields a smooth, comfortable, quiet operation with a lower start-up resistance and more consistent resistance progression than single-stage drive systems.

3-Phase Generator
3-phase generator / eddy current resistance system requires no backup battery in order to efficiently power the bike.

Belt Drive
Belt drive for smoother, quieter operation and reduced maintenance.


Equipment Specifications
Height with PVS 64 inches / 163 cm
Length 67 inches / 170 cm
Width 23 inches / 58 cm
Height 52 inches / 127 cm
Equipment Weight 210 lbs / 95 kg
Maximum User Weight 350 lbs / 159 kg
User Height Range 59 to 77 inches / 150 to 196 cm
Standard Frame Colors
Gloss Metallic Silver
Black Pearl

Console Features
Console Type
Advanced LED Display
Numeric Keypad Yes
Motion Controls Yes
QuickStart™ Yes
Tactile Dome Keys Yes

Electronic Readouts
18 Readouts

Resistance Level,

Distance, RPM, Speed
Calories
Heart Rate
Time Remaining, Time Elapsed

% Complete, Time in Zone, Segment Time Remaining, Average Speed, Calories / minute, Calories / hour, Watts, METS, Target HR, Average HR

Preset Programs:
12 programs accessed by 6 keys:
Manual
Variety
Cross Country
Random
Custom Resistance
Weight Loss
Interval
1:1
1:2
1:3
Heart Rate Control
Basic HRC
Performance
Fitness Test
Hill Climb
Watts Control

Write Your Own Review
You're reviewing:Precor RBK 835 Recumbent Bike